I visited Chevy’s showroom last week right after I shopped for a couple of VW headlights.  I was just checking out the best deals they have in their selection. The dealer went after me and he showed me the latest model of the Chevy Silverado. He was obliged to provide me the details, specs and features of the pickup and it went well. I realized how great the Silverado is.

One of the standard features of the 2007 Silverado is the Keyless Entry. Before you get to seize this awesome ride, you should first program its keyless entry. In case you’re planning to buy a Silverado, here’s the steps on how to go about this task. Programming a keyless entry to a Silverado is so easy. Check this out!  

Steps   
1. First, close all the vehicle doors. Make sure it’s all closed.
2. Insert the ignition key into the ignition lock cylinder.
3. Push and hold the DOOR unlock switch.
4. Set the ignition ON, OFF, ON, OFF while holding the DOOR lock switch in the unlock location.
5. Release go of the DOOR unlock knob. The doors will lock and unlock to verify the program mode.
6. Press and hold the LOCK button and the UNLOCK button simultaneously on one keyless remote. After a delay of approximately 15 seconds, the doors will lock and unlock to confirm the programming of that transmitter.
7. Once again, repeat the previous instruction to program up to four transmitters.
8. With one more click forward, turn the ignition switch to the RUN place in order to go out from the keyless entry transmitter mode.
9. Control the transmitter functions in order to confirm the right system operation.